Spiral Shape Teflon Immersion Heater for Metal Plating Process
- PRODUCT DETAIL
Spiral Shape Teflon Immersion Heater for Metal Plating Process
Teflon Heater from Shenglong Heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, flange immersion heaters are ideal for applications requiring higher kilowatts.
Characteristics & Properties :
Tube diameter: Φ6mm-Φ30mm
Tube Material: SS201, SS304, SS316, SS321 and INCOLOY800 etc
Insulation Material: MgO
Conductor Material: Nichrome Resistance Wire
Wattage Density: High/Middle/Low (5-25w/cm2)
Lead Connection Option: Threaded Stud Terminal or Lead Wire
Lead Wire Type: 300mm Standard (Teflon/Silicone High Temperature Fiberglass are available for PTFE Teflon Heater)
| Heat intensity | Not exceeding 30w/cm2 (advisable) |
| Power | Depends on the dimension |
| Exhaust extreme (when cold) | <=0.1mA to 242 v. |
| Insulation (when cold) | 5 Min Ohms 500 Watts minimum |
| Dielectric strength | 1500v. 1/sec |
| Working temperature | 650 Deg C max. |
| Length tolerance | +/-1.5% |
| Diameter tolerance | -0.02 to -0.06 mm |
| Cut off connection tolerance | +/-15 mm |
| Power tolerance (w) | +5 % – 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
Suggested Applications
Water Deionized, Demineralized, Clean, Potable, Process
Industrial Water Rinse Tanks
Vapor Degreasers
Hydraulic Oil, Crude, Asphalt
Lubricating Oils at API Specified Watt Densities
Air and Gas Flow
Caustic Solutions
Chemical Baths
Process Air Equipment
Boiler Equipment
