O shaped stainless steel teflon PTFE immersion heater

Composition and structural properties of Teflon electric heating tubes
1. It is made of high quality stainless steel (SUS316 or SUS304)/iron/copper electric heating tube inner core and jacket Teflon tube (PTFE). It has strong corrosion resistance and is suitable for heating all kinds of corrosive liquids.
2. Low surface power design (1.5W/CM2) to ensure the service life of the product.
3. The installation position of the electric heater should be careful to prevent solids from depositing on the surface of the electric heater, or the liquid is too thick, and the liquid level is too low, the Teflon tube (PTFE) will be burnt due to poor surface heat.

Composition and performance of titanium electric heating tube
    Titanium electric heating tube, titanium electric heating tube is made of titanium tube as the outer shell, and the spiral electric heating alloy wire (nickel chrome, iron chrome alloy) is uniformly distributed along the center of the tube. The gap is filled and compacted with magnesia sand with good thermal conductivity. Both ends of the mouth are sealed with silicone or ceramic. This metal electric heating element is specially used for high corrosion liquid.
   The titanium electric heating tube is a crystalline magnesium oxide powder in which an electric heating element is placed in a titanium tube and is closely filled with a good heat resistance, thermal conductivity and insulation in a void portion, and has a simple structure and mechanical treatment by other processes. High strength, high thermal efficiency, safe and reliable, easy installation and long service life. Widely used in a variety of highly corrosive liquids.

Teflon heating tube use
    The commonly used Teflon heating tube is a new type of corrosion-resistant electric heater made of PTFE sleeve for heating various corrosive liquids. It has excellent anti-aging properties and good flexural properties, and is designed with low surface load. The Teflon heating tube can be divided into two types, one is to directly spray the surface of the heating tube with fluorine plastic material, and the other is to form a fluorine plastic sleeve on the outer layer of the iron heating tube and the copper heating tube.

Teflon electric heating tube is more suitable for anti-fouling heating place, it is the best choice for anti-rust and anti-scaling. It is electroplating, electrolysis, degreasing, pickling, electroless nickel-phosphorus, anodizing, aluminum pouring, smelting, chemical, pharmaceutical, food and other corrosive objects heating, condensation, evaporation, concentration and so on. It is the best choice for rust and anti-scaling! At the same time, it can reduce acid consumption, energy consumption, waste liquid generation and improve the working environment, which is conducive to environmental protection. Teflon electric heating tubes use temperatures below 110 ° C (heating in very thick liquids, stirring must be configured).

Teflon electric heating tube part
Teflon electric heating tube has the advantages of high thermal efficiency, energy saving, high cost performance, and can be designed in various structural forms, such as spiral type, L type, U type, W type, mosquito coil type, combined type and the like. It has been recognized by many listed companies as a long-term supplier of mosquito-repellent Teflon electric heaters. We can undertake non-standard products, in terms of voltage, power, size and product shape, as well as wiring methods, engineers can design according to customer needs, welcome to map and sample production.

(Teflon electric heating tube, Teflon heating tube products can be customized to customer requirements, providing drawings, voltage, power, size)