Miniature Cartridge Heater Cartridge Insertion Heaters
- PRODUCT DETAIL
Shenglong Heaters manufactured miniature cartridge heater with diameter :1-35mm, designed high quality material , these cartridge heater are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.
| Diameter (mm) | 1-35mm (Non-standard can be customized) |
| Diameter Tolerance | ±0.03mm |
| Length (mm) | 10mm – 10000mm |
| Length Tolerance | ±1.5mm |
| Power | Max 50W/cm2 |
| Temperature | Max 850 ℃ |
| Available with a built in Thermocouple | K or J type Thermocouple |
| Power Tolerance | +5% – 10% (closer tolerances are available upon special request) |
| Input voltage | 12V-480V (non-standard can be customized) |
| Insulation resistance (500 [V-DC] unheated) | ≥50MΩ |
| The maximum leakage current (253 [V-AC] unheated) | ≤0.5mA |
| High voltage stability (temperature) Rated voltage | ≤24V -500V-DC> 24V 1500V-AC |
| Terminal unheated length | <3mm-20mm |
| Non-terminal unheated length | <3mm-20mm |
Mini Cartridge Heater’s Material Specification:
Tube Material: Seamless stainless steel SS304, SS321, SS316L, SS310S, Incoloy 400/600/800/840 etc;
MGO Rod: Imported from Japan Tateho, USA OTC;
MGO Powder: Imported from UK UCM, Japan Tateho;
Resistance Heating Wire: Sweden Kanthal, Germany BGH, NiCr8020;
High Temperature Wire: Fiberglass wire, Pure Nickel Core wire, Teflon wire, Silicone wire;
Terminal Pin: Nickel-manganese alloy, pure nickel wire.
Cartridge Heater package
Specification Requirements for Ordering:
Please note that we manufacture to customer specification. There are many lead options available, including Glass Fibre Leads, Silicon Rubber Leads, PTFE Leads, Ceramic Beaded Leads, Braided Leads and Conduits. Please advise us of the type of leads preferred. If you would like some assistance or advise on the correct lead to use, please do not hesitate to ask.
When ordering Cartridge Heaters, please specify the following information :-
1.Type of Cartridge Heater ( please refer to Termination Options ).
2.Ø of Cartridge Heater.
3.Overall length for a straight Cartridge Heaters.
4.Wattage & Voltage
5.Lead type ( glass fibre / PTFE ) & lead length.
