5 Pin Enail Coil Heater Hot Runner Coil Heater
- PRODUCT DETAIL
5 Pin Enail Coil Heater are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermocouple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.
5 Pin Enail Coil Heaterr For Enail specification:
| Sheath Material | Cr Ni-Steel for 5 Pin Enail Coil Heater |
| Insulation Material | MgO |
| Resistance Wire | Ni Cr 80-20 |
| Maximum Sheath Temperature | 700°C |
| Die Electrical Strength | 800V A/C |
| Insulation | >5 M W |
| Thermocouple | J type (Standard) or K type |
| Length Tolerance (Straight) | 5% |
| Wattage Tolerance | + 10% (+ 5% Available Upon Request) |
| Resistance Tolerance | + 10% (+ 5% Available Upon Request) |
| Unheated Length | 35mm (Standard) |
| Dimensional Tolerance | Coil I.D + 0.1 to 0.2mm |
| Coil Length + 1mm |
Cross section for 5 Pin Enail Coil Heater
3.0 x 3.0, 3.30 x 3.30, 3.5 x 3.5, 4 x 4 etc.
4.20 x 2.20, 4.20 x 2.50
Any other cross sections can be customized on request
Standard and fashion E-nail Coils as follows:
| Spring coil ID16mm Length 10.6/12.7/13.3mm; Voltage : 24/110/120/220v; Wattage:100/150/250w With TC K/J With Kevlar sleeve |
Spring coil ID20mm Length 10.6/12.7m/13.3mm; Voltage : 24/110/120/220v; Wattage:100/150/250w With TC K/J With Kevlar sleeve |
Flat coil type ID9mm OD 26mm Voltage 120/220v Wattage 100w/150w With TC K/J With Kevlar sleeve |
Application of 5 Pin Enail Coil Heater:
